🔧 2019 Triumph Street Triple Battery Maintenance & Replacement

Overview

The 2019 Triumph Street Triple requires battery maintenance & replacement test annually; replace every 2–4 years or if failing to hold charge. Regular battery maintenance extends engine life and maintains peak performance. This guide covers the complete procedure for both DIY mechanics and those seeking shop estimates.

Tools Needed

Supplies Needed

Step-by-Step Procedure

1. 1
   Open the seat and locate the battery.
2. 2
   Disconnect the negative (−) terminal first, then the positive (+) terminal.
3. 3
   Remove the battery from the holder.
4. 4
   Test battery voltage with a multimeter: 12.6V+ = fully charged, below 12.0V = replace.
5. 5
   If keeping the battery: connect to a smart trickle charger for 4–8 hours.
6. 6
   Clean battery terminals and cable ends with terminal cleaner and brush.
7. 7
   Inspect the battery case for swelling, cracks, or corrosion — any of these = replace immediately.
8. 8
   If replacing: install new battery in the correct orientation.
9. 9
   Reconnect positive (+) terminal first, then negative (−).
10. 10
    Apply a thin layer of terminal grease to both terminals to prevent corrosion.
11. 11
    Test the ignition: verify proper starting and charging voltage (13.5–14.8V at idle with headlight on).